Navigation: Home.

MENS Brown Hell Rider Harness Advance Motorcycle Boots.

MENS Brown Hell Rider Harness Advance Motorcycle Boots
Click to Enlarge
MENS Brown Hell Rider Harness Advance Motorcycle Boots.
Specifications: MENS Brown Hell Rider Harness Advance Motorcycle Boots. Made for extreme comfort and durability. Made of top grain full water repellent oil tanned leather in rich brown color and measure 8 1/4 inches tall (shaft 6 1/2 in. and heel 1 3/4 in.). They also feature a square soft toe design, comfortable cushion lining, Neoprene oil-resistant sole and heal. Buy Now and Save Big!

Made of Top grain full water repellent oil tanned leather
Rich brown leather color
Good Year Welt Construction
Neoprene oil-Resistant Sole and Heel
Contrasting black and beige sole and heel
High density EVA Plug for added Support
Cushion Insole for comfort
Square Soft Toe
Brass finished O-Ring Ankle harness strap with adjustable back buckle
Debossed Xelement logo on outer heels
8 1/4 inches tall boot (shaft 6 1/2 in. and heel 1 3/4 in.)
Debossed 'Water Repellent Oil Tanned Leather' on front of boots near the top


Shipping: Ships to Lower 48 USA Only.
Shipping Cost: FREE.
Item #: BDCWX1907-Hell-Rider-Brown.
$139.95 $84.95

Motorcycle Boots, Style And Safety.

Motorcycle boots are associated with motorcycle riders and range from above ankle to below knee boots. They have an outside of a typical boot but a low heel to control the motorcycle. To improve motorcycle safety, motorcycle boots are generally made from a thick, heavy leather and may include energy absorbing and load spreading padding, metal, plastic and/or composite materials to protect the motorcycle rider's feet, ankles and legs in an accident. For use in wet weather, some boots have a waterproof membrane lining such as Gore-Tex, SympaTex or a PU Coating.

Harness boots

Harness boots are very similar to engineer boots. The boots are most often made of heavy weight leather and range in height from short (10 inches) to extra high (38 inches). The most typical height is between 10 and 18 inches. The most common color is black, but brown harness boots are also made.

Harness boots are designed to protect the motorcycle rider from the heat of the exhaust pipes and the engine block and from injury to the foot and leg in the case of an accident while riding and may include a built-in steel toe cap and metal shank in the heel. Whereas engineer boots have a rounded toe, harness boots typically have a square toe. Unlike engineer boots that have an adjustable leather strap across the ankle, harness boots have a non-adjustable system of four leather straps and two metal rings: one strap goes across the top of the foot at the ankle, one strap wraps around the rear of the foot at the ankle and two more straps rise from sole on either side ankle. The four straps are held in place by the two metal rings that are located on either side of the ankle. Typically, these boots possess a pair of pull-straps on either side of the tops of the shafts. Some manufacturers replace these straps with an adjustable leather strap located on the outside top of the shafts, similar to engineer boots. Soles and heels are usually made of hard rubber and may either be relatively flat or may have lugs for increased traction.

Harness boots were originally modeled on the square toed boots prevalent in the 19th century, including those worn by American Civil War soldiers. Leather straps and rings were added to this style in the 1960s, creating the modern version of the harness boot, which quickly became a classic. Harness boots are popular among riders of Harley-Davidson and other motorcycles and among members of the heavy metal scene, and in the leather subculture.

Shop MRLG For All Your Riding Appearl, Sterling Silver Jewlery, Home & Shop Decor, Bike Bags, Handbags & Purses, Belt Buckles, Riders Accessories & Unique Gift Giving.

Valid HTML 4.01 Transitional   Increase your website traffic with   Valid CSS!